12′ Row boat pictures

« of 3 »

Purchase these downloadable 12′ Row boat plans now for…
Only $52.95 USD

Boat plans include both US (inches) and metric units

Start planning your new boat within minutes…

“It’s very nice to row, it’s fast and easy. It is also easy to car top. I don’t know the exact weight, but it’s no problem for two to put it on the car. There is enough room to sit comfortably on the front and on the back seats. We didn’t sail far from the backwater because of quite big waves and wind in that lake. In general I’m very happy about the row boat.”

Justinas Pleikys, Lithuania

12′ Garvey flex pictures

« of 2 »

Purchase these downloadable 12′ Garvey flex boat plans now for…
Only $52.95 USD

Boat plans include both US (inches) and metric units

Start planning your new boat within minutes…

“I was impressed with the way your design handled. With a 9.9 HP outboard on it you need some weight in the bow if you are by yourself. Other wise it is fine. I had a lot of compliments on the boat.”

Norman J. Connors, USA

11′ J – Skiff pictures

« of 2 »

Purchase these downloadable 11′ J – Skiff boat plans now for…
Only $49.95 USD

Boat plans include both US (inches) and metric units

Start planning your new boat within minutes…

11′ Dinghy-Vee pictures

« of 3 »

Purchase these downloadable 11′ Dinghy-Vee boat plans now for…
Only $52.95 USD

Boat plans include both US (inches) and metric units

Start planning your new boat within minutes…

10′ Garvey flex pictures

« of 3 »

Purchase these downloadable 10′ Garvey flex boat plans now for…
Only $49.95 USD

Boat plans include both US (inches) and metric units

Start planning your new boat within minutes…

“We have had the Garvey Flex out on the sea in 60 cm (2 ft) swell and it feels quite stable. We got hold of a used Mariner 4 HP 2 Stroke and that pushes it along quite nicely. The boat is a bit small for 2 people to fish from because there is not much space to put things down or store them. I guess that could be easily fixed with some storage cupboards in the bow and in the seats.

We had a nice family trip the other evening. We sailed from our beach in Saelvig Bay up to Maarup Harbor for an evening drink and back again. It was a beautiful evening and on the way back we watched the sun set and we observed a small school of porpoises quite near to the boat. On that occasion there were 4 of us in the boat and again it handled well.”

David Simmonds, Denmark

10′ Dinghy pictures

Purchase these downloadable 10′ Dinghy boat plans now for…
Only $49.95 USD

Boat plans include both US (inches) and metric units

Start planning your new boat within minutes…

“Thank you again very much for your plans. I have printed all the plans and read everything. They are so easy to understand. I will start working on this boat as soon as possible, maybe in 2 weeks. I am very happy!”

Radu Talasman, Romania

Pirogue adventure

By Eric Fors

As far as the narrative on how the decks helped us, and likely saved the boat from destruction, well, it’s quite a story! A couple of weeks ago, Nathan and I took Reunion out to one of our favorite little streams that we float quite often. It’s a 3 mile stretch of a stream that nearly nobody else ever floats. It was a beautiful day, but the river was at least five feet higher than normal. That’s not quite a “flood stage” level, but it is a lot more water than we usually have in that little river. The other complication is that our area of the Ozarks had some terrible ice storm damage this winter and the rivers and streams are all full of broken tree limbs. We decided to float it anyway and trust on our experience with this particular stream and the fact that even if we had “walk out” that the roadways were no more than a couple miles from the path of the river.

The float started out absolutely beautiful. We were of course making much better time on the float than we normally do, owing to the great amount of water in the river. Reunion handled a bit sluggishly compared to what we were used to, I think because of the heavier current, but as long as we stayed vigilant and made our course corrections early, all was well. 

Well, eventually we came upon a place where the bulk of the river flowed through a bunch of the branches and ice storm debris. We tried to maneuver around the branches, but the current hauled us quickly into the midst of them. The submerged branches turned the haul crosswise to the current and quickly lifted the downstream side of the haul up out of the water. This caused the upstream side to dip its gunwale into the flow of the swollen river and immediately filled the little boat. The current then stripped the boat out from under us and capsized the haul. She sank momentarily in the current and then righted herself and popped back up to the surface a about ten yards downstream still full of water, but floating upright. Next our dry bag, which was originally tied into the boat at the cross members, caught on some other debris in the water and pulled Reunion under the current again. Again, she capsized, sank, and few seconds later popped back up to the surface as before a few more yards downstream. Once again the dry tethered dry bag caught on something under the surface and she repeated the whole process again. Capsize, sink, wait a moment, and pop back up to the surface THREE TIMES! 

We stood in the stream amazed to watch as this little boat we had made with our own hands did things we had never seen any boat we could have bought do. Had we been floating in an aluminum canoe without those sealed decks, we would have had to walk home without our boat or any of the gear we had tied into it. Apparently the buoyancy provided by the air chambers under the sealed decks did enough work to keep the little boat from being slammed against the bottom of the river and actually pulled it back to the surface where we could readily recover it. 

We were very proud of how she performed that day and determined right then and there that all our future builds would have sealed decks built into them. We finished the float, in an hour and a half that day. It usually takes us two and a half hours to do that float, and this day we had two capsizing incidents. What an awesome little craft! Thanx for sharing her design with us.

17′ Touring canoe pictures

Purchase these downloadable 17′ Touring canoe plans now for…
Only $52.95 USD

Boat plans include both US (inches) and metric unit

“I completed my canoe in 6 days before I left on holiday and was very impressed with it’s carrying capacity, maneuverability and it’s looks. An easy project with great results.”

Carl van der Nest, South Africa

16′ Pirogue canoe pictures

Purchase these downloadable 16′ Pirogue canoe plans now for…
Only $49.95 USD

Boat plans include both US (inches) and metric unit

Start planning your new canoe within minutes…

“We have already greatly enjoyed the boat and we are certain she will be great for years to come. The few times that we have had her in the water “Reunion” has been very sturdy indeed. Loaded up with my entire family we still had nearly eleven inches of gunwale to the water line! That flat bottom really does give you a lot of displacement capacity! It took my novice crew and I a little bit to get down the technique required to handle her well, but after a few hours of practice, we could put her just about where ever we wanted to take her.”

Eric Fors, USA

Eric and his brother Nathan have been on a real adventure. This is an absolutely amazing story, where the Pirogue actually SINKS three times.
Pirogue adventure

15′ Daytrip canoe pictures

« of 3 »

Purchase these downloadable 15′ Daytrip canoe plans now for…
Only $52.95 USD

Boat plans include both US (inches) and metric unit

Start planning your new canoe within minutes…

Customer testimonials:
“I received the Manuals and I want to thank you. They will be very useful.”

Ivan Spreicer, Croatia